Sim Connector for MU Phone M200

On most devices the SIM Connector and SIM Card Connector refer to the same board-mounted socket that interfaces the SIM card reader with the motherboard. On some MU Phone M200 devices with separate SIM reader assemblies connected by a flex cable, the SIM Connector specifically refers to the motherboard-side flex cable connector that receives the SIM reader flex — distinct from the physical card contact springs. Verify which component your device requires before ordering.

If the SIM card is confirmed working in another device, the tray is undamaged and correctly positioned, and the SIM Connector Flex Cable is intact — but SIM detection errors persist — inspect the SIM Connector on the MU Phone M200 motherboard under magnification for bent pins, corrosion, or lifted solder joints. These physical signs confirm the connector needs replacement.

Yes. Pin count, connector type, pitch, and board footprint are model-specific. This listing is sourced for the MU Phone M200 motherboard only. An incorrect connector will not provide reliable SIM card interface and risks further board damage.

No. This is a micro-SMD component soldered onto the MU Phone M200 motherboard. Replacement requires hot air rework equipment, precision flux, and board-level soldering skills. Incorrect removal permanently damages the motherboard solder pads.

Yes — a 7-day replacement warranty against manufacturing defects is included. An unboxing video is mandatory for all warranty claims. Connectors that have been soldered are considered used and cannot be returned. For more information, check out SAHII's Return Policy.