Power Button Flex Cable for Videocon Z45 Amaze - On Off Flex / PCB

The Power Button Flex Cable / Patta in your Videocon Z45 Amaze is the ribbon cable assembly that carries the electrical signal from the power button switch to the motherboard. On most Videocon Z45 Amaze devices the physical button switch dome is integrated directly onto this flex cable. When the flex is torn, kinked, or has a damaged connector, pressing the power button produces no response on your Videocon Z45 Amaze — the screen will not wake, and the phone cannot be powered on or off using the button.

If the power button cap is physically intact and pressing it produces a slight mechanical click but the screen does not respond — and the phone can still be woken by other means such as double-tap or fingerprint — the flex cable or its integrated switch dome is likely the fault on your Videocon Z45 Amaze. A technician can confirm by testing the switch continuity with a multimeter.

Yes. The connector type, cable routing, integrated switch specification, and cable dimensions are all model-specific. This listing is designed for Videocon Z45 Amaze only. A flex from a different model will not connect correctly and may not include the correct button switch specification.

It is a moderate repair requiring the phone to be opened, typically involving removal of the side frame or battery to access the power button flex routing on your Videocon Z45 Amaze. No soldering is required in most cases. Professional tools and care are recommended.

Yes — a 7-day replacement warranty covering manufacturing defects is included. An unboxing video is mandatory for all warranty claims. Flex cables showing physical damage from improper installation are not covered under warranty. For more information, check out SAHII's Return Policy.