Loud Speaker Flex Cable for Samsung Galaxy Note Pro 12.2 3G

The Loud Speaker Flex Cable / Patta in your Samsung is the ribbon cable that carries the amplified audio signal from the motherboard to the loudspeaker module. When it is torn, kinked, or has a broken connector, the audio signal cannot reach the loudspeaker — causing no sound output, very low volume, or distorted audio during media playback and calls on your Samsung , even when the speaker driver and Audio IC are both working correctly.

If the loudspeaker stopped working after a drop or a repair that involved opening the lower section of the phone — where the speaker flex typically routes — inspect the flex for visible damage. If the cable is kinked or torn, replacing it is the correct first step. If the cable appears intact, test the speaker module directly to determine whether the speaker driver has failed on your Samsung .

Yes. The connector type, cable dimensions, and routing path are model-specific. This listing is designed for Samsung only. A flex from a different model will not connect correctly and may damage the motherboard speaker connector.

It is a moderate repair requiring the phone to be opened. The speaker flex typically runs from the charging board area to the speaker module at the bottom of the phone on most Samsung devices. Disconnecting and replacing it requires no soldering but does require care to route the new cable correctly without kinking.

Yes — a 7-day replacement warranty covering manufacturing defects is included. An unboxing video is mandatory for all warranty claims. Flex cables showing physical damage from improper installation are not covered under warranty. For more information, check out SAHII's Return Policy.