Coaxial Connector for Lava Z40

The Coaxial Connector for your Lava Z40 is the board-mounted RF connector that mates with the coaxial cable to route antenna signals to and from the motherboard. It is required when the connector has been physically damaged, the centre pin has been bent, or the mating surface has worn beyond reliable contact on your Lava Z40.

Yes — provided the RF cable and antenna are intact, this precision replacement connector will restore secure cable mating and full signal continuity to factory standard on your Lava Z40 after professional board-level installation.

Not necessarily — signal loss can also be caused by a damaged RF cable, a faulty antenna, or a software carrier issue. Inspect the full RF path including cable and antenna first. If the connector is visibly damaged or the cable no longer clicks firmly into position, the Coaxial Connector replacement is the correct solution for your Lava Z40.

It is an advanced board-level repair requiring micro-soldering skills and hot air rework equipment. The old connector must be carefully reflowed and removed, the pad cleaned, and the new connector precisely aligned and soldered to the motherboard. Professional board-level repair is essential for your Lava Z40.

Yes — a 7-day replacement warranty covering manufacturing defects is included. An unboxing video is mandatory for all warranty claims. Connectors with physical damage or that have been installed are not eligible for return. For more information, check out SAHII's Return Policy.