Charging Connector Flex PCB Board for Vivo iQOO U5 5G

The Charging Connector Flex PCB Board / Patta in your Vivo is a small printed circuit board mounted on a flex cable that houses the USB charging port connector and often additional components such as the primary microphone, signal antenna connection point, and sometimes the headphone jack depending on the model. It connects to the motherboard via a flex cable and is the physical point where your charger plugs into your Vivo .

Signs include the charging cable not sitting firmly in the port, the phone only charging at certain angles, no charging response at all despite a working cable and adapter, the phone not being detected when connected to a computer via USB, and the microphone not working during calls — all of which can point to a faulty Charging Connector Flex PCB Board / Patta on your Vivo .

It is one of the more accessible internal repairs. In most Vivo devices the charging board is secured by one or two screws and connects to the motherboard via a snap-fit connector — no soldering required. Opening the phone is necessary, so basic repair tools and experience are recommended. Professional installation ensures the best result.

Yes — in most cases. If the fast charging issue is caused by a damaged charging port or a faulty connection on the flex board, replacing the Charging Connector Flex PCB Board / Patta will restore original fast charging speeds on your Vivo . If the Charging IC on the motherboard is also faulty, that will need to be addressed separately.

Yes — a 7-day replacement warranty covering manufacturing defects is included. An unboxing video is mandatory for all warranty claims. Parts showing signs of physical damage or improper installation are not covered under warranty. For more information, check out SAHII's Return Policy.