Back Camera Flex Cable for Lava Z40

Yes — Back Camera Flex Cable and Camera Flex Cable / Patta both refer to the ribbon cable that connects the rear camera module to the motherboard on your Lava Z40. SAHII.in stocks both naming conventions to match the different terms used across repair catalogues, ensuring you find the correct part for your Lava Z40 regardless of which term you search.

If the rear camera stopped working after a drop or a repair that involved opening the phone — particularly if the flex cable was disturbed during the repair — the cable is the first component to inspect. A kinked, torn, or connector-damaged flex cable visible during inspection confirms the fault. If the cable appears intact, the camera module or Back Camera Connector on the motherboard should be tested next on your Lava Z40.

Yes. Connector type, cable dimensions, and routing are model-specific. This listing is designed for Lava Z40 only. An incorrect cable will not connect properly between the camera module and motherboard.

It is a moderate repair requiring the phone to be opened and the flex carefully disconnected and replaced. No soldering is required in most cases. Professional tools are recommended on your Lava Z40.

Yes — a 7-day replacement warranty covering manufacturing defects is included. An unboxing video is mandatory for all warranty claims. Flex cables showing physical damage from improper installation are not covered under warranty. For more information, check out SAHII's Return Policy.