Xiaomi Mi Note Front camera Replacement

Identify the Dual SIM SD card slot on the left edge of your device.

Insert the Dual SIM SD card removal tool (or a paper clip) into the slot hole.

• The tray should pop out when inserted correctly.

Position the suction cup on the rear of the phone.

• Secure the suction cup firmly.
• Pull back with moderate force; the back plate should release.

Locate and remove the screws marked in the image to detach the battery frames.

• Remove six 3.5mm Phillips #000 black screws using a suitable tool.
• Next, remove seven 2.5mm Phillips #000 black screws.
• Finally, remove five 2mm Phillips #000 silver screws.

Use a nylon spudger to carefully pry upwards and detach the ribbon cable that connects the battery to the motherboard.

Insert a nylon or metal spudger under the battery at any point.

• Slide the spudger around all edges to loosen the battery.
• The glue holding down the backside of the battery may still be present, requiring gentle lifting.

Use a spudger to gently pry upwards and detach the three attached ribbons from the motherboard.

Use tweezers to carefully detach the small ribbon on the left side near the volume buttons with an upward prying motion.

• Apply minimal force when detaching the ribbon to avoid damage.

• Detatch the microphone cord located on the right side along the frame using an upwards prying motion.

Lift out the motherboard using a tweezer.

Ensure that both the Dual SIM card and its tray have been previously removed.

• Use tweezers to carefully detach the front camera's ribbon cable from the motherboard.