Samsung Galaxy Victory 4G Motherboard Replacement
Be extremely careful when handling electronic components, as static electricity can damage them.
- Remove the back plate or battery cover, depending on your device model.
- Disconnect any visible connectors leading to the motherboard.
- Remove the screws holding the motherboard in place, then carefully lift it out of the phone's casing.
Step 1 | Motherboard
Place phone face down, ensuring the display screen side is away from you.
- Slide open the battery door.
- Remove the battery.
Step 2
Use the Phillips #00 Precision Screwdriver to remove the 7 3.93 mm labeled Phillips screws.
Step 3
Avoid damaging the phone's frame or screen.
- Use a plastic opening tool to pry the back cover open.
- Insert the tool into the SD card slot and work around the entire phone.
Step 4
Remove the Phillips 3.93 mm screw located at the bottom center of the phone.
Step 5
Avoid tearing the ribbons by pulling slowly.
- Place a tool under each of the 3 ribbons.
- Pull the tool out slowly to disconnect the ribbons.
Step 6
Push the motherboard back and out to the left, ensuring it is straight up.
- Insert tool under labeled area and pull gently to detach ribbon cable.
- The motherboard should now be completely detached.