Galaxy S20 Camera Lens Replacement
DO NOT attempt to remove the lens from under the silver lip, as this can damage it.
- Apply heat to the area around the lens using a blow dryer or heat gun until thoroughly warm.
- The lens will loosen and be removable once heated sufficiently.
Step 1 | Break your glass....
Heating may damage adhesive; proceed with caution.
- Choose a heat source: blow dryer or heat gun.
- Apply gentle heat to loosen the lens adhesive.
- For punctures, use tweezers to lift glass fragments.
- Refer to next step's photo for accurate lens location.
Step 2 | Remove Glass
No adhesive residue on the silver plate where new adhesive will be applied.
- Use alcohol wipes and tweezers to clean the area.
- No glass fragments should remain inside the cameras.
- Verify camera interior is clear with an alcohol wipe.
Step 3 | Test your camera
Power the device back on and test the camera to verify its functionality.
- Check for any remaining debris in the lens opening.
Step 4 | Apply adhesive
Apply magnifying glass adhesive using the included tools.
Use a high-quality adhesive kit specifically designed for smartphone repairs, such as those found on Amazon or eBay.
- Ensure the adhesive has a cutout to match your device's model (e.g. S20).
- Alternatively, use your preferred mobile repair tape if an adhesive kit with a pre-cut lens is not available.
Step 5 | Apply new lens
Position the new lens over the adhesive, ensuring proper alignment courtesy of the silver retention ring.
- Place the lens in the provided silver holder, which assists with accurate positioning.