Samsung Galaxy S III Battery Replacement
If you have a swollen battery, handle it carefully and follow proper safety procedures when replacing it.
- Refer to this guide for steps on replacing the battery.
Step 1 | Rear Case
Use a plastic opening tool or your fingernail to insert into the notch between the rear case and the phone's body.
- Gently twist the tool to release the top clips holding the rear case in place.
Avoid using force, which may break the perimeter clips.
Step 2
Insert the plastic opening tool into the top edge of the phone and twist it counterclockwise to pry open the gap.
- Slide the tool left along the top edge.
- Twist the tool again to widen the gap between the rear case and the phone.
Step 3
Move the plastic opening tool around the top left corner, prying up the rear case.
- Gently pry along the edges to avoid damage.
Step 4
Use a pry tool to pry along the top right side.
- Continue prying down the right side of the rear case.
Step 5
Remove the rear case by lifting it upwards.
Peel it away carefully if stuck due to clips on the bottom of the phone.
Step 6 | Battery
Use your finger to pry the battery from its recess.
- Locate the small notch above the battery.
- Insert a plastic opening tool into the notch and pry the battery upwards.
Step 7
Disconnect and remove the battery.