Samsung Galaxy Rush Motherboard Replacement

Locate the back cover and gently pry it off with your finger.

• Pry from one corner first.
• Continue prying along the edges until the cover is removed.

Disconnect and remove the battery.

Use a Phillips-head screwdriver to remove the 6 screws securing the back panel.

Remove the back panel using a pry tool. Start at the edge near the screen for easier access.

Use tweezers to carefully remove the upper left connector from the motherboard.

• The second connector, situated above the camera on the top of the device, should come off easily.

Remove the tweezers and gently grasp the adhesive orange ribbons.

• The two ribbons will remain attached to the motherboard.
• Be cautious not to break them when removing from the phone's side.

Remove the bottom screw using a Phillips-head screwdriver. It is located to the right of the charging port.

Hold the screen firmly in place and lift the motherboard straight up.

The motherboard and screen are now physically separate.

• Install the new motherboard in place of the old one.
• Reassemble the unit as instructed in the original assembly procedure.