Samsung Galaxy Pocket Neo S5310 LCD Display, Touch screen Replacement

• Remove the SIM and SD card.
• Unfasten 7x Phillips screws.

• Use a plastic tool to carefully disassemble the rear housing.

Locate the Loudspeaker on the rear of the device.

• Disconnect the LCD Display flex cable.
• Lift up the board and disconnect the Touchscreen flex cable.
• The Motherboard can now be removed.

Use a hair dryer to warm the touchscreen for easier LCD removal.

• Lift the LCD Display using one of the small metal plates located in each corner, then insert a plastic tool underneath.

Be extremely careful not to break the display.

Separate the LCD Display.

• Worm the Touchscreen using a thin tool.

• If the glass is broken, apply transparent tape to prevent shards from scattering.

Separate the touch screen from the front bezel using a plastic tool. Perform this action slowly to avoid damage.

Reassemble your device, following these steps in reverse order.

• Start with the last component installed during disassembly (e.g. display assembly) and work backward to the first one installed.
• Carefully reattach all screws, clips, or other fasteners as they were originally secured.
• Make sure all cables are properly connected before closing any compartments or panels.

Check that the repair is complete and functioning properly.