Five Steps To Apply A New OCA On Samsung Galaxy Note 8 Edge Touch Glass
Familiarity with repair tools can significantly impact job success.
- We'll demonstrate the use of a Universal Laminating Mold, ideal for edge screens and flat screens, perfect for beginners.
- This tool will allow you to laminate a new OCA onto a Samsung Note 8 Edge Touch Glass with high efficiency and a 100% success rate in minimal time.
Step 1 | Put a new OCA
The OCA on a new Samsung Galaxy Note 8 touchscreen does not adhere due to an unnecessary protective layer.
- Do not remove the protective film from the OCA.
- Instead, align and move the OCA around until proper adhesion is achieved.
Step 2 | Using upper mold
Align the upper mold with the base mold, then place it.
OCA absorption may occur on the upper mold.
Step 3 | Remove the protector of the OCA
Remove the OCA protective film.
Step 4 | Remove protector of the new touch screen
Use a piece of easy tear tape to carefully remove the protective film from the touch screen.
Step 5 | Using lamination machine
Verify that mold is securely seated in RMB-2 Laminating Machine.
- Set vacuum time to 30s and lamination time to 10s.
- Allow total process time of 40s for lamination completion.
Inspect the touch screen for bubbles and ensure OCA is properly aligned with no bias or overlap.