Samsung Galaxy Note 3 Rear Facing Camera Replacement

Insert fingernail or plastic opening tool into gap between rear case and base.

• Run your finger or a plastic spudger along the rear case's edge.
• Lift the rear case carefully from its base.

Insert a plastic spudger into the gap between the battery and the phone base.

• Lift the battery out of its recess.

Insert your fingernail into the stylus pen's groove.

• Pull the stylus pen away from the phone.

Remove all 12 x 4mm Phillips #00 screws from the back chassis.

• Insert the plastic opening tool into the Stylus Pen placement holder.
• Lift the plastic opening tool, and the midframe will separate from the base.

Remove the screw located beside the headphone jack.

Remove both antenna clips using tweezers.

• Disconnect the six cable connectors with a spudger.

Hold the motherboard firmly in place with tweezers.

Unclip the camera connecting cable with a plastic opening tool.

• Remove the loose camera from its base.