Samsung Galaxy Mega Earpiece Speaker/LED Indicator Replacement
- Front Facing Speaker and LED Blinker Replacement
Step 1 | Battery
Ensure the device is completely turned off before proceeding.
- Locate the slot in the top left corner of the back of the phone.
- Insert a plastic opening tool or your fingernail into the slot and pull up to release the back plate.
- Slide your finger around the device between the back plate and the phone to release the connectors.
Step 2
Insert fingernail into battery slot on bottom and gently pull up.
- Continue to remove the battery.
Step 3 | Midframe
Be aware that using a metal spudger may result in cosmetic damage.
- Remove the 14 3.45 mm Phillips #000 screws from the assembly.
- Gently insert a plastic opening tool into the seam above the volume buttons, or use a metal spudger to initiate the process.
Step 4
Slide a plastic opening tool slowly around the device to release internal connectors.
- The device should easily come apart once the tool has been slid around its perimeter.
- During reassembly, ensure that volume and power buttons align correctly.
Step 5 | Earpiece Speaker/LED Indicator
Remove black 2.55 mm Phillips #000 screw.
Step 6
Use a plastic opening tool to remove the metal cover.
Step 7
Disconnect the motherboard clip from the speaker assembly.
- Gently lift the speaker and LED assembly out of the device.
- If the speaker assembly is stuck due to glue, carefully pry it loose using a gentle prying motion.