Samsung Galaxy Luna LCD display Replacement
This guide will help you replace the Samsung Luna LCD display.
Step 1 | LCD display
Hold the suction cup firmly over the lower half of the glass screen and attach it.
Step 2
Apply gentle downward pressure with your thumbs on the screen's middle section.
- Pivot your wrist upward to pry loose the lower edge of the screen.
Step 3
Be extremely cautious when handling the delicate LCD.
- Insert a Spudger tool between the glass and motherboard into the created gap.
- Gently slide the Spudger tool around the gap to completely separate the screen from the motherboard.
Step 4
Grasp the rear panel at both top corners and gently pull upwards.
- Maintain a firm grip and continue pulling until the panel is fully separated from the phone's frame.
Step 5
Careful handling required to avoid damaging the LCD.
- Position the spudger tool between the glass screen and the display.
- Gently slide the spudger in until both are separated, taking care not to apply excessive force.