Samsung Galaxy J7 V Motherboard Replacement
To repair your Samsung Galaxy J7 V's motherboard, follow these steps: replace it with a new one. First, access the internal components by disassembling the device.
- Remove the screen assembly for clearance.
- Take out the screws securing the front panel.
- Disconnect the home button connector.
- Release the battery pack, disconnect it from the motherboard, and remove it.
Step 1 | Screen
Handle the OLED display with care as it's prone to damage.
- Insert a Jimmy tool under one corner of the OLED display.
- Gently lift the display using the Jimmy tool.
Step 2
Slide the Jimmy tool gently around the phone's edge.
Step 3
Handle the display's ribbon cables with care due to their fragility.
- Lift the display assembly carefully to dislodge it from the device.
Step 4 | Home button
Insert a metal spudger into the gap between the home button and its surrounding socket.
- The tip of the spudger should fit snugly into this narrow space.
- Gently pry up on the home button using the metal spudger.
Step 5
- Insert the metal spudger under the home button.
- Lift upwards to release the home button from its socket.
Step 6 | Remove the backing
Position the phone so that the back is facing down.
- Lift the backing off from the right-hand side using the indent provided.
Step 7 | Remove the battery
Lift the bottom edge of the battery to avoid damage or injury.
- Remove the battery completely.
Step 8 | Motherboard
Remove all 14 screws from the midframe with a Phillips #00 screwdriver.
Step 9
Flip the phone over.
- Locate the battery compartment on the rear of the phone, which is now exposed.
- Aplly gentle pressure along the edges using your fingers until the midframe releases.
Step 10
Flip the phone over.
- Remove the Phillips #00 screw from the motherboard.
- Place a few iFixit opening picks beneath the motherboard.
- Spread the opening picks evenly around the motherboard to prevent bending.
- Lift the motherboard using the iFixit opening picks.