Samsung Galaxy J3 Mission Motherboard Replacement
The motherboard is a critical component of your Samsung Galaxy J3 Mission phone and can be easily damaged.
- The motherboard supports several components, including the camera module, SD card reader, SIM card reader, and charging port.
- The motherboard enables communication between the CPU, RAM, and other computer hardware elements.
Step 1 | Back Cover
Insert fingertip into the back cover removal slot.
- Pull back gently until the cover pops off.
Step 2 | Battery
Ensure device power-off by disconnecting AC adapter.
- Pry out battery with a fingertip in the battery slot.
- Pull back gently until the battery releases.
Step 3 | SD and SIM Cards
Slide the SD and SIM cards out of the device using your fingertip.
Step 4 | Screen
Use an iFixit opening tool to pry the screen loose from one side of the phone.
- Lift the screen until it is loose enough for safe removal.
Be careful around the home button — tabs can break if adhesive isn't loosened first.
Remove the small plastic brace holding the damaged screen in place with an iFixit opening tool.
Step 5 | Midframe
Remove the metal panel by unscrewing its eleven 5mm Phillips #000 screws.
Step 6
Flip the device over with the metal plate facing up.
- Push down firmly on the plate to release it from the back panel.
Step 7 | Motherboard
Handle the motherboard carefully, as it is fragile.
- Lift the motherboard upwards with your finger, beginning from the bottom.