Samsung Galaxy J3 Mission Midframe Replacement

The middfame has multiple screws holding it in place, requiring some time to remove. It serves as a protective barrier for internal components and provides structural integrity.

Step 1 | Back Cover

Insert fingernail into back cover removal slot and gently pull back to release cover.

Step 2 | Battery

Ensure your device is powered down.

Insert a fingernail into the battery removal slot and pull back gently.
The battery should pop out.

Step 3 | SD and SIM Cards

Slide the SD and SIM card out using your finger.

Step 4 | Screen

Careful handling is required when approaching the home button as its retaining tabs are prone to breaking.

Lift the screen using an iFixit opening tool from a vertical phone edge and pry gently until loose.
Remove the small plastic brace connecting the damaged screen with an iFixit opening tool.

Loosen adhesive holding the home button tabs to prevent damage during removal.

Step 5 | Midframe

Remove the metal panel using a Phillips #000 screwdriver.

There are 11 screws, each 5mm in length.
Remove all of them from the metal panel.

Step 6

Turn the device over and press firmly to release the metal plate from the back panel.