Samsung Galaxy J3 Luna Pro Front and Back Camera Replacement

Disconnect power to prevent damage or injury.

• Remove the back cover.
• Take out the battery.

Do not remove the screen completely — cables remain connected.

• Attach a suction cup to the screen and pry upwards.
• Insert the plastic opening tool into the gap under the screen.
• Work your way around the perimeter with the plastic opening tool.

Insert the pointy end of a spudger into the gap beside the white plastic cover and gently pry it away.

• Use the spudger to carefully lift up the display cable from the motherboard.
• Once the cable is disconnected, set the display aside.

Remove the eleven JIS 00 screws from the mid-frame.

• Use a spudger to pry the mid-frame from the screen.

Remove the motherboard from the mid-frame.

• Flip up the retaining flaps on the front and rear camera ribbon cable ZIF sockets using a spudger.
• Pull the cables out of the ZIF sockets.