Samsung Galaxy J3 (2016) SIM Card Replacement
Power off your device before proceeding.
- Follow this guide to remove the MicroSD memory and the SIM card from your Samsung Galaxy J3.
Step 1 | Rear Cover
- Use a fingernail or the flat end of a spudger to insert into the divot to the left of the rear-facing camera.
- Pry the rear cover gently away from the phone until all plastic clips are released.
Step 2
Remove the rear cover.
- To reinstall: Align the rear cover with the back of the phone.
- Squeeze the phone's perimeter to snap the clips into place.
Step 3 | Battery
Insert a fingernail or the flat end of a spudger into the divot below the battery pack.
- Pry the battery pack out of its recess.
Do not push too hard with a spudger or you will puncture the battery pack.
- Remove the battery pack.
Step 4 | SIM Card
Use a fingertip to slide the MicroSD card out of its slot.
- Remove the MicroSD card from the phone.
- Repeat the process for the SIM card, sliding it out of its slot using a fingertip.
Make sure both cards are properly oriented during reinstallation, as they can only be installed in one direction.