Samsung Galaxy J1 Glass Screen Replacement

Insert the plastic spudger between the back cover and the device.

Pry the rear cover gently off the back of the phone.

Locate the SIM card slot.

• Pull the SIM card down using your finger.
• The SIM card will be exposed; remove it completely.

Verify that you have removed the correct part to avoid damaging internal components.

Check that the device is free of any additional obstructions, such as a battery (not pictured).

Use a Phillips #00 screwdriver to remove the eleven 3 mm screws.

Prying can damage glass screens and internal clips — be careful.

• Insert a plastic opening tool between the screen and back of the device.
• Gently slide the tool along the edges, starting at the bottom of the device.
• Pry the main assembly from the midframe; avoid cracking glass or breaking internal clips.

Disconnect the digitizer cable connector using the flat end of a spudger.

Insert a plastic opening tool between the silver digitizer and .

• Pry gently to loosen the adhesive.
• Slowly slide the tool around the screen to release the attachment.
• Be cautious not to damage the digitizer cable while routing it through the housing.

Careful separation of components may damage electrical connections.

• Separate the display assembly from the plastic housing.