Samsung Galaxy Centura Screen Replacement

Finger pinch risk when pressing into the groove.

• Locate the rectangular groove on the top side of the device.
• Firmly press a plastic opening tool or index finger into the groove.
• Pull back firmly to open the device.

Locate the battery within the exposed phone interior.

• Gently grasp the battery between your thumb and index finger.
• Pull upwards to release the battery, expecting minimal resistance.

Identify and note the locations of all screws on the device's back.

• Use a Phillips #00 screwdriver to remove the five screws.
• The screws are 5.0mm in length.

Locate the indentation on the side of the device.

• Gently insert a plastic opening tool into the indentation.
• Pry the plastic apart with a firm motion.
• Pull the plastic apart gently and set it aside.

The phone should now appear as shown in the second picture.

Locate and pull back the clips on the right-hand side and upper-left side of the phone.

• Release the clips carefully to prevent damage.
• Gently raise the motherboard to expose the screen from the back.

Insert the metal spudger at the top edge of the back side of the screen.

• Gently apply pressure to lift the screen.
• Continue pulling the screen upwards from one side until it is completely removed.