Samsung Galaxy Alpha Display Assembly Replacement

• Locate the top left slot on the back panel.
• Insert a fingernail or prying tool and lift the top left corner of the back panel slightly.
• Slide the fingernail or prying tool around the outer edge to fully release the back panel.

Ensure the device is powered down before proceeding.

• When replacing the NFC antenna, make sure it comes with a new one as it's glued to the old battery.
• NFC antenna replacement requires a new one including the battery replacement.
• Locate the slot at the base of the old battery and insert your thumb.
• Pull the battery out, pushing slightly toward you to dislodge it.

Locate the slot adjacent to the flashlight.

• Insert a prying tool or your fingernail into the slot.
• Lift around the perimeter, being gentle but firm, to remove the back panel.

Power down your device.

• The new battery must include an NFC antenna, which is packaged with it.
• Locate the slot at the base of the battery.
• Press your thumb into the slot and push up/toward the battery while lifting up and away to release from the slot.

This step is crucial for accessing other internal components, but can be skipped if you're only replacing the screen.

• Use a JIS #000 screwdriver to remove all twelve 3mm screws surrounding the back of the phone.

Heat the iOpener in a microwave for 30 seconds.

• Apply the iOpener to the front screen and move it so that all areas are heated evenly.
• Perform multiple heating cycles before proceeding. Additional heat cycles can make removal easier.

Ensure the screen is thoroughly heated before moving forward to avoid damage or complications.

Failure to heat the adhesive thoroughly may cause it to break and make repair more difficult.

• Use a heat source to thoroughly warm the adhesive before attempting to pry off the screen.

• Do not press on the phone's back while lifting the screen, as this will crack the glass.

• The connections at the bottom of the touch screen are fragile and can be easily damaged. When removing the adhesive from this area, work carefully to prevent damage.
• Slide an opening pick around the perimeter of the glass, taking care not to push it too far under the screen.

• Pry the screen up gently using a flat tool.
• Lift only the top of the screen, avoiding the button connections at the bottom of the phone.