Samsung Galaxy A70 Back Cover Replacement

Risk of overheating damage to the display and battery.

• Power off your Galaxy A70.
• Use an iOpener to soften the adhesive under the back cover for at least two minutes, repeating as needed.
• Alternatively, use a hair dryer, heat gun, or hot plate with caution to avoid overheating.

• Attach a suction cup to the phone's back near its right edge.
• Pull the suction cup away from you to create space between the cover and frame.
• Insert an opening pick into the opening created by the suction cup.

• Slide the opening pick along the edge to the bottom right corner.
• Leave the opening pick in place to prevent adhesive resealing.
• You may now remove or continue using the suction cup for better control during removal.

Insert a second opening pick underneath the bottom right corner of the back cover.

• Slide the opening pick along the edge to the top right corner.
• (Optional) If cutting is difficult, reapply heat with the iOpener.
• Leave both picks in place to prevent adhesive from resealing.

Insert a third opening pick under the top right corner of the back cover.

• Slide the tip along the top edge to cut the adhesive.
• Leave the pick in the top left corner to prevent resealing.

Insert a fourth opening pick under the top left corner.

• Slide it along the left edge to break the adhesive.
• Leave the pick in its place to keep the adhesive from resealing.

Insert the fifth opening pick at the bottom left corner.

• Work your way along the bottom edge, using gentle pressure to separate the adhesive.

Remove the back cover.

Allow 2-3 minutes for the adhesive to form a secure bond, applying gentle pressure. Alternatively, place the phone under a stack of heavy objects.