Samsung Galaxy A51 Screen with Frame Replacement
This repair is specific to the Samsung Galaxy A51.
- Remove the screen bezel using a plastic spudger.
- Disconnect the screen connector and carefully lift out the broken screen.
Step 1 | Samsung Galaxy A51 Screen with Frame
The Samsung Galaxy A51 is now available as a replacement part.
Step 2 | Back Cover
Warm the device to loosen the adhesive.
- Apply a suction cup to the back cover.
- Use plastic tools, such as playing cards, for separation.
Step 3 | SIM Tray and screws
Remove the SIM Tray.
- Take out thirteen Phillips screws. They are located at various points on the device.
Step 4 | Middle Frame removal
Use only plastic tools to separate the metal frame.
Step 5 | Test the new spare part
Insert and test the spare part.
Step 6
Remove the main flex cable from its connectors.
- To remove the fingerprint sensor, first remove two Philips screws using a screwdriver.
- Next, disconnect the flex cable attached to the fingerprint sensor.
Be careful not to touch any internal components while working inside.
Finally, locate and disconnect the coaxial antenna cable.
Step 7
Remove the Sub-board? Charging board.
- Remove the single small black screw securing the motherboard.
- Separate the board from the motherboard.
Don't forget to transfer the receiver.