Samsung Galaxy a20e Charging Board Replacement

• Insert a SIM eject tool, SIM eject screwdriver tip, or a straightened paperclip into the small hole on the SIM tray.

• Press firmly with the eject tool to avoid damaging the tray — risk of damage.

• Remove the SIM card tray and ensure the cards are correctly oriented inside it when replacing them.

Heat the screen using a hairdryer or an iOpener.

• Lift the display with a suction cup, creating a small gap between the phone back cover and the display.
• Insert an opening pick or thin tool into the gap and slide it along the entire edge to cut the adhesive.
• Lift the display with the suction cup to separate it from the back cover.

Remove the seven Philips #00 screws.

• Remove the charging board cover.

• Disconnect the logic board connector.
• Remove the white and blue wires from their respective connections.
• Unscrew the Philips #00 screw.

Disconnect the charging board from its mounting points.

• Remove any screws or clips holding the old board in place.
• Take out the old charging board and set it aside.
• Install the new charging board in its correct position.
• Secure the new board with screws or clips as required.