Samsung Galaxy A20 Charging Port Replacement

Replacing a damaged charging port requires advanced soldering skills.

Remove broken charging port using a soldering iron and desolder wick.
Install brand-new charging port with soldering iron and flux.

Step 1 | Back Cover

Unplug the device from power.

Power off the device.
Remove the SIM card.
Remove the SIM card tray.

Avoid using excessive force, as this can damage components.

Warm the adhesive with an iOpener or heat gun.
Insert an opening pick in the seam between the back cover and chassis while the adhesive is warm.
Slide the pick around the entire perimeter, reapplying heat as necessary to avoid cold adhesive.

Do not attempt to cut through cold adhesive.

Back cover: carefully remove once the adhesive has been sufficiently loosened.

Step 2 | I/O Board

Remove the 13 3.6 mm Phillips screws securing the midframe.
Pry up and lift out the midframe using an opening pick.

Step 3

Locate the press connectors on both ends of the ribbon cables.

Use a opening tool to gently pry up each connector, working from both sides.

Step 4

Disconnect the red antenna cable from the I/O board.

Use an opening pick to pry up and remove the I/O board.

Step 5 | Charging Port

Use of soldering iron poses fire and burn risks; work in a well-ventilated area.

Desolder the charging port.