Samsung Galaxy A10 Charging Port Replacement
Replace the Micro USB charging connector on a Samsung A10 or A10s device.
Step 1 | Remove the back cover
Remove the SIM Tray.
- Separate the back cover using a plastic tool.
Step 2
Remove the silver Phillips screws to access and disassemble the motherboard shields.
Step 3
Disconnect the battery.
- Remove the screws using a suitable tool.
- Take off the charging board shield.
Step 4 | Remove the charging board
Disconnect the main flex cable from its socket.
- Also, disconnect the coaxial antenna cables from their sockets.
- Next, remove the charging board.
Step 5
Remove any debris from the microphone hole and cover it with adhesive-backed felt or a similar material.
- Apply heat from a hair dryer or heat gun to loosen the Micro USB connector.
- Gently pry the connector away using a spudger.
Step 6
Remove any debris from the tin.
- Install the new charging connector securely.
Step 7
Use a soft-bristled brush to gently sweep away any debris from the circuit board.
- Inspect the board for any visible signs of damage or corrosion.
- Connect the power source and turn on the device to test its functionality.