Samsung Exhibit II 4G Midframe Replacement

• Insert the plastic opening tool under the back cover.
• Apply pressure and use a downward motion to pop off the back cover.

Use a plastic opening tool to lift the battery.

Pry the battery gently until it is completely removed.

• Plastic opening tool - insert under back cover.
• Pry top cover upward to remove from phone.

Remove the top cover.

Remove all four 3.8mm Phillips #000 screws.

• Two screws are located on the top of the device.
• The other two screws are found at the back of the device.

Insert plastic opening tool under top cover.

• Slide top cover away from phone using your hand.

Remove four 3.8mm Phillips #000 screws

• Located at the edges of the device.

Insert plastic opening tool between back assembly and phone.

• Pry back assembly away from phone.

Use a plastic opening tool to pry around the edge of the back assembly.

Remove the back panel assembly from the main body.

• Grasp the edges of the back panel assembly.
• Pull it away from the main body.