Samsung Epic 4G Power Button Replacement

• Use your fingernail to gently pry along the device's edge.
• Pull carefully until you hear a distinct snap – this indicates the backing has separated.

Locate and gently pull the plastic backing until you hear the distinctive snap sound.

Remove the battery by gently pulling its edge upwards.

Locate the memory card in the upper right-hand corner.

• Gently slide the memory card out of its holder using your fingers.

Remove the seven Phillips #000 screws from the back of the phone.

• Separate the backing from the silver trim using a nylon spudger.
• Note: Most buttons, including the power button, will fall out during this process.

Remove the power button using tweezers.

If replacing, ensure the new part is from an authorized manufacturer.

• Install the new power button according to its provided instructions.
• Carefully secure it in place with a few gentle presses.