Samsung Captivate Speaker Replacement

Press the bottom section of the phone to release the back cover.

• Slide the back cover down.
• Lift the back cover up.

Place your finger under the battery and lift upwards to remove.

Install the new battery, replacing the old one.

Locate the spudger and position it under the phone's bottom section.

• Gingerly lift and push the spudger to dislodge the bottom section, allowing two hidden screws to become visible.

Remove six 4.5mm #000 Phillips screws.

Forcing the cover may crack the plastic.

• Start at a corner with a spudger to separate rear case from front display.
• Move spudger towards top on both sides; use plastic opening tool if preferred.
• Apply gentle pressure in center and slide cover towards bottom, avoiding the top area.

• Remove the Rear Case screws.
• Gently pry the Rear Case away from the phone body.

Remove the speaker assembly from the LCD with a Phillips 00 screwdriver.

Lift the bottom tab of the plastic ribbon cable connector using a plastic opening tool.

• Pull out the ribbon cable.
• Use a spudger or plastic opening tool to lift up the speaker, then carefully remove it by hand.