Oppo X9000 Volume Button Replacement

Turn the phone over to expose the back side.

• Pry the back cover up from the top, near the headphone jack and camera.
• Move down the sides and bottom to completely remove the back cover.

Remove the battery by lifting the top-right corner nearest the camera using your finger.

Remove the twelve exposed 3.6 mm Phillips screws from the rear of the phone.

• Use a 3.6 mm Phillips screwdriver.
• Store all the screws in a safe place to avoid losing them.

Locate the circular rubber screw covers on the phone's back.

• Insert the spudger into the gap between each cover and the chassis.
• In one motion, pry out the stopper from its hole. Be prepared to apply force if necessary.

Remove the three 3.6 mm Phillips screws using a 3.6 mm Phillips screwdriver.

Position the plastic opening tool under the chassis, near the power button.

• Pry the chassis away from the phone.
• This may require some force, but it should separate easily.

Insert the sharp end of the spudger into a gap near the volume button and gently pry the bracket away from the rear case.

Turn the phone sideways.

• The volume button should now be loose and easily removable.
• Retrieve the volume button immediately to avoid losing it.