Oppo X9000 Speaker Drivers Replacement

Flip the phone over to access the rear.

• Start prying the back cover from the top edge near the headphone jack and camera.
• Gently work your way down both sides and bottom of the phone to completely remove the back cover.

Remove the battery by gently lifting the top-right corner nearest to the camera with your finger.

Remove the 12 exposed 3.6 mm Phillips screws from the rear of the phone.

Use a 3.6 mm Phillips screwdriver to avoid damaging the screws.

• Set aside the removed screws in a safe location where they will not be lost.

Use a spudger to carefully remove the three circular rubber screw covers on the back.

• Insert spudger into border between cover and chassis, then pry stopper out in one smooth motion.
• This may require some force.

Remove the three 3.6mm Phillips screws using a 3.6mm Phillips screwdriver.

Insert the plastic opening tool under the chassis near the power button.

• Pry the chassis away from the phone using a gentle but firm motion.
• You may need to apply a moderate amount of force.

Use the flat end of the spudger to carefully pry the speaker drivers away from the chassis.