Oppo X9000 Rear Camera Replacement

Pry the back cover off by inserting your fingers at the top near the headphone jack and camera, then working downwards.

• Start at the top of the phone, near the headphone jack and camera.
• Move your fingers down the sides and bottom to completely remove the back cover.

Use your thumb or index finger to lift and release the battery from its holder at the top right corner closest to the camera.

Remove the twelve 3.6 mm Phillips screws from the rear of the phone.

• Use the 3.6 mm Phillips screwdriver.
• Store all screws in a safe place to avoid losing them.

Insert a spudger into the gap between each rubber screw cover and the phone's chassis.

• Gently pry up the rubber cover with the spudger, working in one smooth motion.
• The stopper may require some force to remove.

Use a 3.6 mm Phillips screwdriver to remove the three exposed 3.6mm Phillips screws.

Insert the plastic opening tool underneath the chassis, near the power button.

• Pry the chassis away from the phone using gentle but firm pressure.

Hold the camera and gently pull it straight up using your fingers.

Be careful not to touch any surrounding components or wires.