Oppo X9000 Power Button Replacement

• Turn the phone over to face the back.
• Pry the back cover up from the top near the headphone jack and camera using your fingers.
• Remove the back cover by sliding it down the sides and bottom.

Remove the battery by lifting the top-right corner nearest to the camera with your finger.

Remove the twelve 3.6 mm Phillips screws on the rear of the phone using a 3.6 mm Phillips screwdriver.

• Store all the screws in a safe place to avoid losing them.

Remove the circular rubber screw covers from the back of the phone using a spudger.

• Insert the spudger between each cover and the chassis, then pry out the stopper in one motion.
• Some force may be required for this step.

Use a 3.6 mm Phillips screwdriver to remove the three 3.6mm Phillips screws.

Prying with excessive force may damage the phone.

• Insert the plastic opening tool under the chassis near the power button.
• Pry the chassis from the phone gently but firmly.

Use the sharp end of a spudger to carefully pry the power button bracket away from the side of the rear case.

Flip the phone onto its side to access the power button easily.

• Ensure the power button is removed carefully and kept track of it.