Oppo X9000 Chassis Replacement

Flip the phone over to expose the back side.

• Use your fingers to pry the back cover up from the top, just above the headphone jack and camera.
• Migrate downwards along the sides and bottom to completely remove the back cover.

Remove the battery from the phone by lifting the top-right corner nearest the camera.

Remove the 12 3.6 mm Phillips screws from the rear of the phone using a 3.6 mm Phillips screwdriver.

• Set aside all removed screws in a safe and accessible location.

Apply gentle to moderate pressure to avoid damaging the phone's chassis.

• Insert the spudger between the rubber cover and the chassis.
• Pry the stopper out of its hole in one smooth motion.

Remove the three 3.6mm Phillips screws using a 3.6 mm Phillips screwdriver.

Apply gentle yet firm pressure to avoid damaging the phone or the plastic tool.

• Position the plastic opening tool near the power button and slide it underneath the chassis.
• Pry the chassis away from the phone using a smooth, steady motion. Some force may be required.