OPPO N1 Motherboard Replacement
The motherboard is a critical component of your smartphone.
- Identify symptoms of motherboard failure, such as a non-functional device.
- Determine if the issue lies with the motherboard or another component.
This guide will walk you through the replacement process for the motherboard.
Step 1 | Rear Case
Start with the plastic opening tool inserted into the crevice, located where the back cover can be most easily accessed.
Step 2
Rotate your phone 90° counterclockwise for reference.
- Gently slide a plastic opening tool around the edge of the phone to release the back cover.
- You may hear snapping noises as you do so.
Be gentle not to damage any components.
Step 3 | Battery
Use a ph0 Phillips head screwdriver to remove the six magnets, not screws, which hold the motherboard in place.
- Each magnet is approximately 4mm long and wide.
- Remove all six magnets carefully to prevent damage.
Step 4
Remove the sliver plates using tweezers or your bare fingers.
Step 5
Hold the black plate by the edges and lift it off.
Step 6
Grasp the connector tabs with tweezers or your fingers and gently pull upwards.
Step 7
Careful not to damage the device or injure yourself.
- Hold the blue opening tool at a shallow angle and gently pry the battery away from the sticky tape.
- Continue prying until the battery is released.
Step 8 | Motherboard
Remove the three connector tabs using tweezers or your fingers.
Step 9
Use tweezers or your fingers to carefully lift and remove the motherboard.