OPPO N1 Battery Replacement
To avoid damage, ensure the device is turned off and disconnected from power sources.
- Identify and locate the battery compartment on your Oppo N1 smart phone.
- Open the compartment by sliding it gently to the left or right (depending on model orientation).
Step 1 | Rear Case
Insert plastic opening tool into the crevice, starting from this location for easiest access to the back cover.
Step 2
Rotate the phone 90 degrees counterclockwise as shown in the photo.
- Gently slide a plastic opening tool around the edge of the phone to release the back cover.
- You may hear snapping noises as you release the back cover.
- The rear case should then come free.
Step 3 | Battery
Use a ph0 Phillips head screwdriver to remove six screws, each measuring 4mm in length.
- Screws hold the motherboard in place.
Step 4
Remove sliver plates using either tweezers or your fingers.
Step 5
Remove the black plate by hand.
Step 6
Use tweezers or your fingers to lift the connector tabs.
Step 7
Be careful when prying the battery from the sticky tape.
- Use a blue opening tool to gently separate the battery from the sticky tape.