OnePlus Nord N20 5G Motherboard Replacement

Insert the SIM ejector tool into the small hole next to the SIM tray.

• Pull the tray outwards after a slight click is heard.
• The SIM card tray can now be removed by sliding it outwards.

Reheat the iOpener in 10-30 second increments, until hot.

• Apply heated iOpener to phone's backside for one minute.
• Use iFixit opening tool and slide along edges to pry off back panel.

Remove all 18 3.9 mm screws with a Phillips #0 screwdriver.

Use the iFixit opening tool to pry along the edges.

• Separate the back housing from the screen frame.

• Use a spudger to disconnect the brackets attached to the motherboard.
• Remove the 2.8 mm Phillips #0 screw from the motherboard with a Phillips #0 screwdriver, taking care not to damage any wires.

Remove the black and white wires from the motherboard with a spudger.

• Pull back the front facing camera for easier access to the board.

Remove the motherboard by pulling it upwards with a spudger.