OnePlus Nord N20 5G Battery Replacement
Before attempting to replace the battery, ensure you've tried troubleshooting on the OnePlus Nord N20 5G Battery Not Charging page.
- Check if your CPH2459 model's battery drains fast or powers off under 30% — if so, proceed with this guide.
Be cautious: small parts can break during repair.
Step 1 | Back Cover
- Insert the SIM ejection tool into the small hole beside the SIM tray.
- Pull the SIM card tray gently until it pops out, then slide it out for removal.
Step 2
Heat iOpener in microwave for 30 seconds.
- If not hot enough, reheat for additional 10-30 seconds.
- Apply heated iOpener to back of phone for 1 minute.
- Use iFixit opening tool to pry off back panel along edges.
Step 3 | Battery
Remove all 18 x 3.9 mm screws using a Phillips #0 screwdriver.
Step 4
Use the iFixit opening tool to pry the edges of the device.
- Sweep the tool along all four sides of the frame.
- The back housing should now be separated from the screen's frame.
Step 5
Use a spudger to disconnect the brackets from the motherboard.
Step 6
Remove the tape covering the battery.
- Pull up the battery using the green tape on its right side.
- Replace the old battery with a new one.