OnePlus 6 Battery Replacement
A depleted or faulty battery can cause charging issues and failure to power on.
- Check the OnePlus 6 Troubleshooting page for easy fixes before proceeding.
Be cautious of a swollen battery, which poses a fire and explosion hazard.
- Remove the phone's back panel, made of glass, using care to avoid damage.
- Ensure all power sources are disconnected and the phone is shut down before proceeding.
Step 1 | Back Panel
Heat gun can overheat or melt the plastic; be cautious.
- Turn on the heat gun at low heat and gently warm the curved edges on the phone's back.
- Insert the opening picks between the front and back panels, sliding them around the perimeter to release the adhesive.
- Repeat until the back panel is fully released.
Step 2
Remove the back panel carefully.
- Lift it upwards slowly.
- Avoid damaging the fingerprint sensor ribbon cable.
Step 3
- Disconnect the cable by grasping the red tab with tweezers and pulling upward.
- Remove the back panel in its entirety from the device.
Step 4 | Battery
Remove the battery by gripping its green tab and pulling it straight up.