OnePlus 2 Charging Port Replacement

Power down the device completely.

• Pry off the exterior casing using a spudger, an opening pick, or your thumbnail.

Be careful when handling the SIM card tray — risk of damage.

• SIM Card Tray: Locate on device back and grasp with thumb.
• Gently slide it out towards you.

Do not force the SIM card tray removal process.

• Remove the SIM card tray.
• Insert a PRA tool or SIM ejector to pry open the tray.
• Pull the tray out gently from the device.

Remove six rubber screw covers using a pair of tweezers.

• Next, use a Phillips head driver to remove eighteen screws from the mid frame.

Be careful not to damage any components during this process.

• Use a plastic opening tool to gently pry up the mid frame from the back of the phone.
• Work your way slowly around the entire device, releasing each clip as you go.

• Pry the battery free using a spudger tool.
• Lift upwards to release the adhesive.
• Pry up the connection between the battery and phone on the top right corner.

Remove the top charging port connector using a strong plastic spudger by:

• Lifting the connector with the spudger and guiding it along the cable to release the adhesive.
• Continue until you reach the second connector, then stop.

Use a spudger to gently pry up the remaining four connections on the charging port.

• Lift the cable slowly along its length using the same spudger.

• Insert a spudger into the bottom of the phone and push the charging part inward until you feel it release.

• Pull the charging port away from the frame, working your way around any clips that may be holding it in place.
• Once the port is free, remove the remaining retaining clip with your fingers.