OnePlus 2 Battery Replacement
Failing battery may cause charging issues or rapid discharge.
- A replacement is required to resolve this issue.
- Dismantle the device according to the user manual's instructions.
- Battery Compartment must be located and accessed.
Remove old battery from its compartment carefully, as it may still hold electrical charge.
Install a new Battery in the same position as the old one.
Reassemble device and test thoroughly to ensure proper functionality.
Step 1 | SIM Card
Turn the phone completely off, ensuring it is powered down.
- Pick one of the following tools:
- Opening Pick
- (Reference)
- Spudger
- Carefully pry off the outer casing.
Step 2
Be careful not to damage the SIM card tray when pressing in and removing it.
- SIM card tray: Press in with your thumb on the phone's rear.
- Gently slide it out.
- Repeat for the second SIM card slot (if applicable).
Step 3
Find the SIM card tray.
- Insert a SIM Ejector Tool into the tray and gently pry it open.
- Take out the SIM card tray from the device.
Step 4 | Battery
Be cautious when handling nearby components during removal.
- Remove and carefully set aside 6 rubber screw covers, using a pair of tweezers.
- Completely remove the covers to access the screws.
Follow proper screwdriver techniques to avoid damage when unscrewing.
- Remove all 18 screws with a screwdriver, applying [Screw type] specifications.
- Use a torsion wrench for tightening and adhere to recommended torque guidelines.
Step 5
- Pry the mid frame from the back using a plastic opening tool.
Release the frame clips carefully, starting clockwise.
Step 6
Pry the battery up using a spudger tool.
- Release the adhesive grip.
- Lift the connector with a spudger from the top right edge.