Nexus 5 Battery Replacement - Nexus 5

Prying around the SIM card slot and volume controls can cause damage due to thin plastic.

Use a plastic opening tool to release clips on top and sides of the back cover.
The bottom is secured with adhesive foam; an opening pick should help free the back cover.
Release all clips except those near the midframe, then swing the back cover off from the top for easier removal.
To reattach: apply gentle pressure over "Nexus" and slide your thumb up towards the top to engage the snap near the flash window.

Remove the six Phillips #00 screws (4.0 mm) securing the midframe.

Retain all six screws, as they hold the midframe securely to the motherboard.

The three small snaps on the back cover ensure NFC and wireless charging connections are secure.
For LCD/digitizer replacement, remove four additional 4.0mm daughterboard cover screws.
You may need to pierce clear adhesive material to access these screws.

Remove the midframe from the phone.

Examine the midframe and back cover for three small snap attachment points.
Verify that these snaps are in good condition, ensuring proper connection between the NFC antenna contacts on the motherboard.

Disconnect the battery connector with the flat end of a nylon spudger.

Disconnect the daughterboard ribbon cable using the flat end of a spudger.

Then, gently pull the cable away from the battery.

Never puncture or bend the battery — risk of damage.

Use a plastic opening tool to pry the battery out of its housing.
If necessary, use a heat gun to apply gentle heat and soften the adhesive below the battery.
Dispose of the old battery: bag it up for recycling at an environmentally responsible location.