Nexus 5 Antenna Cable Replacement
Replace antenna cables if your Nexus 5 experiences frequent service loss.
Step 1 | Remove the Battery Door
Locate the plastic clips holding the battery door in place.
- Insert a plastic spudger between the clips and gently pry them apart.
Step 2 | Unscrew the Midframe and Speaker Assemby
Use a #00 Philips Screwdriver to remove six midframe screws.
- (Note: The far right screw might be stuck due to adhesive)
- Remove four speaker assembly screws at the bottom using your #00 Philips Screwdriver.
The adhesive covering one of the screws may require a plastic spudger for removal.
Step 3 | Remove the Midframe and Speaker Assembly
Disconnect the Battery Connector.
- Remove the Midframe Screw using a Torx T10 Driver.
- Gently lift out the Midframe and Speaker Assembly.
Step 4 | Remove and Replace the Antenna Cables
Identify the antenna cables, one gray and one black, on either side of the battery.
- Using a plastic spudger, disconnect both ends of the antenna cables.
- Connect new antenna cables.
Ensure the antenna cables are securely connected to prevent signal loss or damage.
Step 5 | Reassemble the Device
Screw the midframe and speaker assembly back into place.
- Push the outer edges of the battery door down until you hear the plastic clips "click."
Step 6 | Power on the Device
Press and hold the power button until you feel a vibration or see the Google logo on screen.