LG V10 Headphone Jack Replacement

Insert the flat end of a plastic spudger or your finger between the back cover and the charging port.

• Ensure the spudger is not in the charging port itself, but rather between the metal lining and the back cover.
• Lift up on the spudger or with your finger to pop up the back cover.
• The rest of the back cover should now easily slide off by inserting a finger or spudger under it and working around the sides.

Use either your finger or the flat end of a spudger to pry the battery out.

• Pry against the battery release impression.

Using a screwdriver with J000 Phillips bit, remove fourteen 3.175 mm screws.

• Pry part of the back panel up from the sides of the battery slot using a plastic opening tool.
• Release the rest of the panel using plastic tweezers and pry it up around the sides, being careful near the fingerprint sensor and camera lens.

Disconnect the connectors with a plastic spudger's flat end, prying them away from the motherboard.

• Pry the motherboard out using plastic tweezers and remove it.

Locate the headphone jack at the bottom right corner of the phone.

Use tweezers to carefully pry open the headphone jack by lifting it upwards.