LG Ultimate 2 Digitizer Replacement
Be cautious when handling the digitizer replacement process, as improper removal may damage the connected data cable.
- Plastic spudger to loosen screen attachment.
- Use your hands to carefully pull the screen off.
- Screwdriver to unscrew the screen from the phone.
Step 1 | Battery
Insert the plastic opening tool into the gap between the plastic backing and the phone's main body.
Step 2
Hold the phone firmly and gently pull the plastic cover away from the device.
Step 3
- Insert the plastic opening tool into the wedge near the bottom of the battery.
- Lift the battery out carefully, taking care not to touch any internal components.
Step 4 | Digitizer
Remove the 11 mid-frame screws with a Phillips #0 screwdriver.
Step 5
- Insert a plastic opening tool to begin prying the phone open.
- Work your way around the phone's edge using the plastic opening tool, separating sections as you move along.
Step 6
Insert a plastic opening tool between the zip connector and the phone.
Note: The zip connector will not detach completely from the phone, but acts as a flap that can be moved out of the way.
Step 7
Insert the plastic opening tool between the screen and base.
Be prepared for difficulty due to strong adhesive.
Apply sufficient leverage to force an opening.
Step 8
Continuously move the plastic opening tool along the edge of the screen.
- Separate the pieces from the adhesive using a gentle prying motion.
A hair dryer can be used to help melt the adhesive, but use with caution and follow proper safety guidelines.
Step 9
Use a spudger to carefully pry the screen away from its adhesive.