LG Stylo 2 Motherboard Replacement
Internal damage, including water damage, can render the motherboard unusable and necessitate replacement.
- Clean your hands thoroughly or wear gloves when handling internal components.
- This guide will outline a straightforward process for replacing the motherboard.
Step 1 | Battery
- Remove the back case by placing the phone face down.
- Insert a plastic opening tool into the initial gap shown.
- Slowly guide the tool around the case until it comes off easily.
Step 2
Place the back case aside.
- Utilize a fingertip or an opening tool to detach the battery.
Exercise caution when removing the battery to avoid damaging the phone or the battery itself.
Step 3 | Rear Camera
Remove the eleven 4mm Phillips #00 screws.
Take note of screw locations for reassembly.
- Place removed screws in a safe location to avoid loss or damage.
- Use the Plastic opener tool to remove the inner case.
- Gently pry and remove the inner case.
Step 4
Flip the flex cable using your finger or an opener.
- Carefully use the precision tweezers to remove the camera.
Step 5 | Motherboard
Handle the motherboard with care to avoid damage.
- Use the opener tool to gently flip the cables (marked in red).
- Remove the motherboard itself by gently prying it loose.
- Place the motherboard on a soft surface to prevent damage.