LG Stylo 2 Display Replacement
A damaged or unresponsive display may require replacement, which involves removing all internal components due to the display's fixed position within the phone.
- Disassemble the entire phone to access the display for replacement.
- Display removal is not feasible without risk of damaging surrounding components.
Step 1 | Battery
Remove the back case by inserting a plastic opening tool into the initial gap.
- Place the phone face down on a flat surface.
- Slowly guide the tool around the case until it comes off easily.
Step 2
Place the back case aside.
- Remove the battery using a finger or the opening tool.
Careful not to damage the phone or the battery.
Step 3 | Rear Camera
Remove all eleven 4mm Phillips #00 screws.
- Set screws aside in a safe location.
- Use the Plastic opener tool to remove the inner case.
- Gently pull the inner case away from the main unit.
Step 4
Flip the flex cable shown in red box with your finger or an opener.
- Hold the precision tweezers firmly and carefully grasp the camera.
- Gently pull the camera away from its mounting point.
Step 5 | Motherboard
Handle the motherboard with care — potential for damage.
- Flip the cables (red boxes) gently using an opener tool.
- Remove the motherboard, taking care not to touch its components.
- Protect the work surface with a soft material and place the motherboard on it.
Step 6 | Display
Remove the Vibrator carefully.
- Next, remove the sensor with care.
- Before proceeding, prepare for film removal.
Step 7
Peel off the film using tweezers.
- Remove the headphone jack using tweezers with gentle care.
- Securely store all three devices in a safe, known location.